Pch Ring Hammer Crusher for Stone and Ore

Introduction:
PCH Ring hammer crusher impact crusher rotor ring with a hammer. Ring Hammer can not only rotate with the rotor, but also around the hammer pin rotation. The particle size of the adjustment is achieved by replacing the different specifications sieve to achieve. The gap between the rotor and the sieve can be adjusted by adjusting mechanism needs to be under.
PCH ring hammer crusher is suitable for crushing all kinds of brittle materials, such as coal, stone coal, coke, slag, red sandstone, shale, loose limestone. Compressive strength of the material does not exceed lOOMPa, surface moisture materials should not exceed 8%-ll%, for non-bonding materials, surface water can be controlled within 15%. The device has energy saving, to ensure that the particle size, high efficiency, low noise, less dust, etc., used in mining, cement, coal, metallurgy, building materials, roads, fuel and other departments of medium hardness and brittleness of the material for crushing.

Working principle
PCH ring hammer crusher is a punching rotor type crushing machine with ring-hammer on the rotor. The material is firstly crushed by the punching force of the high speed ring-hammer rotating , then the crushed material is thrown forward to crushing board for the second crushing, required sizes material will get out through the sieve plate, but bigger sizes material will be shot back to the ring-hammer again for the third crush. Such process repeats until the materials are crushed to the required size.

Equipment composition
Steel frame, rotor, grate bar, blow bar and adjustment devices

Features:
1. Simple structure, large crushing ratio and high production efficiency.
2. Low noise and little dust.
3. Highly efficient and energy saving

Technical parameter: